Blog
The close-up photo is of a 3/4″ diameter hole in my well cap that is normally filled by a simple plug. The well is 47 years old; these days, a vent would probably occupy that hole. I was about to introduce a diluted bleach solution to address some coliform bacteria, but inside this hole, as […]
Hello, I am looking for opinions on the usage of housewraps and/or rain screens on walls and roofs with rigid poly-iso exterior insulation. A little background first. I am building a small home, off-grid, home in Eastern Washington. We are climate zone 5b and very dry (only about 14″ of rain annually and very little […]
Factory Automation Market to Approach USD 370 Billion by 2034, Growing at 6.5% CAGR | Exactitude Consultancy GlobeNewswire
(PDF) Integration of Maintenance Management System Functions with Industry 4.0 Technologies and Features—A Review ResearchGate
(PDF) Industry 4.0 Technologies for Manufacturing Sustainability: A Systematic Review and Future Research Directions ResearchGate
We’re about to put a roof on our home addition which has a flat roof in California. Our roof was approved with min r-30. Underneath the base plywood rough roof structure is 2×6 rafters which we will either put iso board or spray foam, I’m thinking just boards to mitigate any off gassing risks. On […]
Wall Assembly Advice for Off-Grid Mountain Cabin Hi everyone! I’m looking for some input on a wall assembly I’m planning for my off-grid mountain cabin. The cabin was built in 1986, but harsh weather and a lack of maintenance from the previous owner have left us with quite a few projects to tackle… We’re currently […]