Blog
Katarzyna Kalisz: how disruptive technologies are reshaping aerospace manufacturing The Manufacturer
See attached photos. While preparing to repaint, I noticed mold when I took off baseboards. My question is about finding the cause, as I’m already planning to rip out affected areas (unless someone strongly advises against). I used concrobium to wipe away what I thought was surface mold, but was likely just old crusty dust. […]
I received such spot on advice for a roofing question I figured I would ask the other one that was puzzling me… I have a side “shed” style roof under the eave side of the main gable roof of a 26×16 accessory structure. The side roof is just intended to cover the front door and […]
I’m sizing a new heat pump system. Trying to decide between Tempstar (Carrier equivalent) systems rated at 24K BTU/hr ( AHRI Cert#: 215319085) and 30K BTU/hr ( 215319098). As of right now, I estimate my design load at 5F to be 25000 BTU/hr. There’s less low-load cycling for the 24K system and less unmet load for […]
Hello all, I’m about to install new foam board insulation on an addition attached* to a late-1800’s triple wythe brick farmhouse in zone 5A (central PA). I’ve read a ton and am doing my best to make sure I manage and transition my control layers, but was hoping for an expert opinion on transitioning between […]
This is the second post of GBA’s series, “Building Science Puzzles.” The first post, which you can read here, discussed the reasons for the investigation, explained the process, and shared the observations, data, and other findings that were collected. This second post, published a week after the first, details the answer, or at least a hypothesis […]
Rethinking universities for Industry 5.0: Where humans and AI co-create the future Gulf News