Blog
We are installing a variety of natural stone flooring, including terrazzo, slate, and marble. It is our understanding that we will need a sealer for these areas, but would like to minimize VOCs and off gassing if possible. Radiant floor heat will be underneath the marble and slate specifically. Are there any additional on-going emission […]
Best Practices A step-by-step guide to selecting, wiring, and configuring residential ventilation controls By Jon Harrod | December 11, 2025 Photo: Brian Pontolilo Getting the right amount of ventilation air is important. We need enough to dilute pollutants, but too much can drive up heating and cooling costs. Excess ventilation can also make homes dry […]
I’ve been thinking about this question since June, because at the start of the summer there’s always a lot of people complaining that the upstairs of their house is hot. They often want to ventilate their attic to help cool off the upstairs. But I was busy in the summer; things have slowed down for […]
Inforegio – Advancing smart specialisation and Industry 4.0 in the Danube Region European Commission
Robots in classroom: Telangana’s ATCs to help students acquire Industry 4.0 skills The Hindu
Logic Analyzer Market to Reach USD 3.23 Billion by 2032, Driven by Industry 4.0 & IoT Expansion industrytoday.co.uk
Azerbaijan launches Industry 4.0 readiness program to boost industrial transformation Report.az
I am building a Pretty Good House in Southern Missouri, Climate Zone 4a. I want to start off by saying I have read the Golden Article regarding the amount of rigid foam exterior insulation here: https://www.greenbuildingadvisor.com/article/calculating-the-minimum-thickness-of-rigid-foam-sheathing My projected wall assembly from interior to exterior is as follows: 5/8 Drywall > “Smart” Vapor Retarder > Fiberglass […]
Hi, I’m looking to get opinions on venting an attic by using a custom made chase. Climate Zone 6. It’s a 100 years old house with a hip roof and hip dormer (Foursquare house) It has board sheathing. There are soffit intake vents but no ridge vents. We could see condensation on the underside of […]