Blog
I have a few questions regarding incorporating wrb, continuous insulation and window install with vinyl siding. I am doing conventional framing with 5/8 cdx plywood taped for air seal and 2 inches of unfaced gps insulation( to allow vapor permeability and pro clima soltex mento 3000 as my wrb 1) do i put the wrb […]
Editorials: IoT in Manufacturing: Powering the Smart Factory and Industry 4.0 Transformation A3 Association for Advancing Automation
Working on a new build with a vented attic in CZ 4A and becoming concerned about nighttime radiative cooling leading to intermittent condensation on the roof sheathing. Exterior roof insulation or treated sheathing would be the most robust solution, but the project is already beyond that point. The roof currently has standard roof vents installed […]
Hello, I was wondering if anyone had anything to add to my decision matrix on my upcoming purchase and install of 4″ exterior insulation. This is on a 2 story custom home with a moderate amount of large punched openings with approximately 5000 sqft of exterior insulation. This is my personal house, and instead of […]
The house was built in 1924. Roof is 2×6 stick-built 16″ OC gable roof (1x ridge), 1×8 decking with asphalt shingles. There are 2 dormers on each side of the house, roof is N/S aspect. 5/12 pitch. Gable ends have a vent each, and the ridge is vented with that porous mesh underlayment beneath the […]
I live in central Vermont and have a staple-up hydronic radiant floor (Onix) under a tiled living space (10’x18′). The basement below should be treated as unconditioned, but it has easy working conditions. Rodents have compromised the foil-faced R19 fiberglass insulation currently installed, and I’m looking to bolster the R-value and prevent further issues. House […]