Blog

Kioxia UFS 4.0 Flash Obtains Automotive SPICE CL2 Certification, Setting Industry Benchmark  BERNAMA

Overcoming Barriers in Manufacturing: Sachin Saxena’s Vision for Industry 4.0  Business Standard

We have an accessory building under construction with a sloped roof 8′ to 10′ pitch (2/12) and a metal roof was installed, including a blueskin ice and water shield. The back of the roof has a 12″ overhang, the sides and front are 24″ – all water slopes to the back.  We are now in […]

Not long ago I installed a Panasonic Intelli-Balance 100 in my basement. It is a stand alone setup. It does not tap into the current hvac at all. I used the Panasonic FV-WC04VE1 exterior vent cap. It’s styrofoam that splits in two and has exhaust on one side and inlet on the other. The system […]

Hey All,We are considering a change to our exterior cladding.  We’d like to change the lap siding on the front wall out for a ‘thin-brick’ veneer.  WALL COMPONENTS (see atch’d):1. 2×6…

Hey guys, I have a dumb question and I have looked it up but getting mixed reviews on how to do it. I am vaulted a ceiling in my house that currently has 2×8 rafters. (I have a roof thats only 6 years old so adding foamboard outside isnt an option). I have a vented […]

NRCan’s downloadable data for all sliding glass doors has 21400 rows, apparently one row per door option.  The highest SHGC is 0.63. Only 4 doors are higher than 0.6. Why are there no sliding doors with an SHGC higher than 0.63? Does the frame of each individual door reduce the SHGC? Does the frame surrounding […]

As demands for artificial intelligence (AI) and machine learning (ML) grow, the IT hardware, energy infrastructure, and data center architecture needed to support these systems will have to adapt to keep up with these advancements. High performance compute (HPC) will require chips and processors that operate differently than traditional chips used in most data centers. […]

The chemical industry is a significant contributor to global CO2 emissions, accounting for approximately 3% of total emissions. Key chemicals produced in the sector—such as ethylene, methanol, and propylene—are essential for industries ranging from plastics and textiles to energy. As the global focus on reducing emissions intensifies, the chemical sector faces increasing pressure to find […]

Practical use cases for smart manufacturing success | Leadership & Innovation  AdvancedManufacturing.org