Blog
Industry 4.0 guru to ask: will Australia be left behind in the current Industrial Revolution? Australian Manufacturing Forum
Capgemini recognized as a Leader in Everest Group’s Industry 4.0 Services PEAK Matrix® Assessment 2025 Capgemini
GBA advisors, Hello all, looking for feedback on the attached design Climate zone “5A” , Connecticut Building Codes. Attempting to follow “Joseph Lstiburek’ perfect wall design as well as info gathered from the GBA site. https://buildingscience.com/documents/insights/bsi-001-the-perfect-wall (Open Joint Vertical Cladding with rain screen, 4″ External Rigid foam insulation, no cavity insulation, 2×4 construction, European aluminum […]
We’re doing a down-to-the-studs-and-slab “rebuild” of a small 2×4 wood frame construction cottage. All heating and appliances are electric, This is in Eugene, Oregon, which is climate zone 4C, a mild climate with moderately high humidity in the winter and low humidity in the summer. Interior vapor production in the winter would arise from one […]
In CZ6 and currently installing interior smart vapor retarders. A combination of Membrain and Majrex. Thinking about paint next. Have a strong desire to use something like JW Wall paints limewash mineral paint or similar. (https://www.jhwallpaints.com/products/lime-wall-paint). From what I’ve read, limewash paint is very vapor open. If true, this would likely work well with the […]
I have recently purchased an older home, and there is a 10″ hard pipe running into my mech room from the exterior of the home. It is not connected to anything. I have been told that this fresh air pipe is for the combustion air of tank water heaters. I want to use the pipe […]
Hi Everyone, I’m currently working on the design of an addition to my house. The project involves adding a second story and an attic with vaulted ceiling to an existing 1950’s bungalow. In the end the house will be 2.5 stories. I’m in climate zone 6. Im working through my wall assembly design now and […]
