Has anyone used Weyerhaeuser Framer Series lumber for their build? also, sheathing/wrb opinions? – GreenBuildingAdvisor
Hello. I’ve just about got every detail narrowed down on my future build including all the materials I’d like to use. For reference: Climate Zone 4A, Kentucky Flooring System: TJI are a no, I don’t want OSB on my project, with the exception of maybe Advantech Subfloor or even the LP Legacy Subfloor (opinions on […]
Rip it out, batts against the foundation with interior side poly will probably be moldy. Ideally, you want ALL the R value in the form of a nonpermeable insulating material (some kind of rigid foam) in a basement, but you can use foam right over the wall and then batts inside of that. You don’t […]
I have been searching on the web for information on vacuum-insulated glass (VIG). I know Pilkington has been offering them for a few years, in the R-5/U-0.2 range, and I can see that there are lots of other websites of companies that say something about VIG, but it’s kind of hard for me to tell […]
Question for those familiar with using Drainage Mats along with exterior foam: is it necessary?? Working with my local building inspectors on this wall design and they are not familiar with any foam thicker than an inch. My wall assembly (central MN zone 6):drywall with class iii vapor retarder2×6 wall with at least r-19 batts1/2” […]
Hi All, This project takes place in Zone 6A, Chittenden county, Vermont. The bungalow we are renovating has 2×4 walls, a vaulted ceiling, and doghouse dormers. I need your help in brainstorming what my options are for increasing the insulation and air tightness of the building. We don’t want to add exterior insulation because the […]
Digital Thread Market Projected to Reach USD 52.69 Billion by 2032 Driven by Industry 4.0 Adoption | Research by SNS Insider Yahoo Finance
Pharma 4.0—the Key Enabler for Successful Digital Transformation in Pharma – part3 CHEManager
OMRON opens Bengaluru automation centre to drive Industry 4.0 growth Manufacturing Today India
Sheffield Forgemasters opens new training facility – “we will build a workforce which is fully conversant in Industry 4.0 manufacture” Insider Media Ltd