Ventilation for sealed attic and crawl space – GreenBuildingAdvisor

I’ve designed and been building my home with a building envelope along the exterior – foundation, basement/crawl space concrete floor, walls, and including the roof sheathing.  As such, it has a sealed/unvented attic and crawl space, with each divided into about 5 separate spaces. 

Rather than rely upon passive ‘leaks’ throughout the ceiling for instance, I had planned to intentionally control the ventilation between these spaces with a separate air handler.  I bought a Fantech AEV 80 to use for just this purpose (the entire house will be tied to outside air with a Panasonic Intelli Balance 200.  My thought was to exchange ‘fresh’ air from within the house, perhaps the mechanical room, with stale air from the attic and crawl space using the AEV 80 (not directly connected to outside). 

I am wondering if anyone is familiar with any variation on this, suggestions, advice. 

One thing in particular is feedback on how to return the air from especially the attic spaces.  The crawl will have a larger opening connected to the basement, so it may be more reasonable for it to have air passively return to the AEV, however the attic spaces will be separated from the rest of the living space with drywall.  Could I duct the AEV to blow ‘fresh’ air into those spaces, and for the attic have a passive rigid duct through wall framing, opening into the crawl space.  I worry that this is a fire hazard (by code) and thus not a valid option, in which case I assume I will need to duct everything back directly to the AEV.

*And yes, I used Lstiburek’s notes/details and that of others to design my roof, unvented attic, including over 41% of insulation being rigid over roof sheathing (under standing seam steel).  All eaves, soffits, etc are sealed (no overhangs/Monopoly framing).